CRS-CPT05銅箔抗剝離強度測試儀(Copper Foil Peel Strength Tester)按IPC-TM-650試驗方法手冊中的2.4.8和2.4.9設計制造，**用于覆銅層壓板和印制線路板工業的實驗室外中測量柔性板和剛性板上銅箔的抗剝離強度。是PCB廠家選擇的*佳產品。結構簡單、操作方便，可放置于工作臺上進行試驗。其采用電子控制系統，經調速器控制調速馬達轉動，再經過變速機械機構減速后驅動T型絲桿副帶動橫梁上升與下降，來完成試樣的拉伸或壓縮試驗。力值由推拉力計反饋顯示，試驗速度實時顯示。本機可用于測試材料、成品、結構物之拉伸、壓縮、撕裂、剝離強度等，廣泛應用于電線電纜、塑料薄膜、橡膠制品、紡織皮革、服裝鞋業、汽車配件、五金配件等多種行業，是品質管理、物性試驗之基本設備。
The design and manufacture of copper foil peel strength tester (Copper Foil Peel Strength Tester) 2.4.8 and 2.4.9 of IPC-TM-650 Test Methods Manual professional for copper-clad laminates and printed circuit board industries experimentaloutdoor measuring the peel strength of the flexible sheet and the rigid panel of copper foil. PCB manufacturers to choose the best products. The structure is simple, easy to operate, and can be placed on the work bench trial. The use of electronic control systems, the governor speed control motor rotation, and then, after the shift mechanical reducer drive beams rise and fall of the T-screw vice driven to complete the tensile or compression tests. Force value by pushing or pulling force feedback, the test speed real-time display. The machine can be used to test materials, finished products, tensile structures, compression, tearing, peeling strength, widely used in wire and cable, plastic film, rubber products, textiles and leather, clothing footwear, automotive accessories, hardware accessories and more the seed industry, quality management, physical property test of basic equipment.

一．主要技術指標

1. *大試驗力：200 N  力表能力：可選擇0-1kg，0-5kg，0-10kg，0-15kg的力表。

2. 分辨率：0.01N 

3. 測試誤差：±0.5%

4. 剝離速度：50mm/分（2"/分）

5. 試驗行程：100mm

6. 速度精度：±1%

7. 測試方式：電子控制，點動/自動切換

8. 電源：220V

9. 外形尺寸：310*410*500mm（W×D×H）

10. 凈重：16kg

**用于測量剛性覆銅板上的銅箔抗剝離強度，配備剛性試樣夾具小臺車